Reducing cyclic rate on the BCP stock transmitter
The BCP and BCP Pro have very exaggerated cyclic swash plate movement. The servos can even move far enough that they jam the swash plate against the main shaft. If you have more movement than you want, or want to reduce cyclic response for scale flight, this mod can achieve this without messing up your mechanical setup. It is also switchable; next time I will show you how to install a DR switch on the stock transmitter.
I don’t have a CP Pro transmitter. I assume the internals are very similar, but there may be subtle differences I’m not aware of.
If you attempt this modification and mess up your transmitter, or succeed, only to crash and injure yourself or someone else, I am not responsible. I will, however, gladly answer any questions you may have and attempt to bail you out if you damage something. Email me or send me a PM on RunRyder for more info.