Connecting IDE Devices to 8-bit Machines


Introduction to IDE
IDE hard disk on the Epson QX-10
GIDE: The Generic (Z80) IDE interface
CoCoIDE: An IDE Interface for the TRS Color Computer III!
XTIDE: Interface ATA (16-bit) [E]IDE hard disk to your XT-class PClone.

Introduction to IDE

The Integrated Drive Electronics (IDE) interface lends itself well to adding hard-disk and CD-ROM capability to any machine.

This adaptability is due primarily to its extreme similarity with the old Western Digital WD100x series of hard disk controllers. In fact, except for a difference in data-bus width and some bit-reassignments in one of the control registers, the two systems are identical.

For a complete treatment of the IDE interface and an example of interfacing IDE devices to a machine with an 8-bit data bus, see issues 56, 63, 64, and 66 of The Computer Journal.


IDE hard disk on the Epson QX-10

A couple of years ago, I was involved in the development of a control chip for a system-independent IDE host adapter. In my case, I built an adapter for my Epson QX-10 to use an IDE hard disk. The interface was fairly simple to build and only minor changes to the BIOS were necessary. The old WD1002-HDO driver routines were 95% correct for controlling the IDE hard disk (first a Conner CP-3022, then a Conner CP-342, and now a Conner CP-3024).

For the record, the only changes made were:

In the process of making the changes, the old explicit seek code had to be eliminated, but since IDE drives perform implicit seeks on all commands, no functionality was lost.

If you are interested in building an IDE host adapter for your favorite 8-bit machine, you can obtain a system-independent control chip and general schematic from:

Wayne Sung / wsung@jessica.stanford.edu

Here are some pictures of my ``Q10IDE'' IDE host adapter for the QX-10.


GIDE: The Generic (Z80) IDE interface


CoCoIDE: An IDE Interface for the TRS-80 Color Computer III

Current Schematic

This interface is being developed by long-time CoCo user Jim Hathaway. I became involved in it when he asked for help with trouble-shooting his early experimental versions.

For full history and latest developments, check out the Color Computer IDE Project Home Page!

I don't have a CoCo myself, but I've wanted to play with one (and OS-9!) for some time. I learned quite a bit about the CoCo and M6809 CPU through assisting with this project.

The schematic should serve as a general guide-line for any 6809 IDE interfacing project. It should be noted that the current design permits ignoring the upper half of the IDE data register to simplify OS-9 device-driver design.


XTIDE: Interface ATA (16-bit) [E]IDE hard disk to your XT-class PClone.

This interface and accompanying driver software was developed by Scott A. Christensen. He asked me to put it on my web pages, so here it is. (I'm sorry it took so long, Scott--I finally scratched out enough time to make the update.)

The first text file contains a general description and ASCII-art schematic.
The second text file contains driver source code (in C) with embedded ASCII-art schematic.

Enjoy!


Return to Small Computer Systems
Return to top level

Copyright © 1995-2025 John D. Baker, jdbaker@NoSpAm!consolidated.net